Refer to "High Pressure Fuel Pump" in this group.
Child restraint anchorage position
Your vehicle is equipped with an anchor for securing the tether strap of a child
restraint system (child seat).
The child restraint anchor fittings are installed on the shelf behind the rear
se ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the heater comtral module.
(Refer to the HA group - "Controller")
...