Kia Optima: Knock Sensor (KS). Repair procedures

Knock Sensor (KS). Schematic Diagrams

Circuit Diagram ...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to “Intake And Exhaust System” in EM gro ...

See also:

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the heater comtral module. (Refer to the HA group - "Controller") ...

Rail Pressure Sensor (RPS). Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in ...

Special Service Tools
  Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09214-3K000) (09231-H1100) Install ...