The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls that door’s window. However, the driver has a power window switch which can block the operation of the passenger windows.
NOTICE
To prevent the possibility of damage to the power window system, do not open or close more than two windows at the same time. This will also ensure the longevity of the fuse.
WARNING - Windows
Adjustment After Headlight Assembly Replacement
If the vehicle has had front body repair and the headlight assembly has been
replaced, the headlight aiming should be checked using the aiming screen as shown
in the illustration. Turn on the he ...
Front Disc Brake. Components and Components Location
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
Removal and Installation
1.
Disconnect the ignition coil connectors (A).
2.
Remove the ignition coils (A).
Tightening torque
:3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2. ...