I: Inspect and, if necessary, adjust, correct, clean or replace.
R: Replace or change.
Inspection
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the lighting switch of
the multi-function switch. (Refer to the multi-function switch)
3.
Wi ...
Installation
1.
Installation is the reverse of
removal.
•
When installing, apply
the ATF oil or white vasel ...
Adjustment
Adjusting method for T/M control cable
1.
Make sure vehicle does not roll
before setting room side shift lever and T/M side manual control lever to
"N" pos ...