Circuit Diagram
Installation
Do not reuse the injector retaining clip, O-ring,
backup ring, washer seal or combustion sealring. Once an injector is
removed, the f ...
Removal
1.
Remove the battery and the battery
tray. (Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
Tightening torque:7.8 ~
11 ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and
various engine speed.
Condition
...