Kia Optima: Alternator. Repair procedures

Alternator. Components and Components Location

Components 1. Pulley 2. Front bracket 3. Front bearing 4. Bearing cover 5. Bearing cover bolt 6. Rotor 7. Rear bearing 8. Rear bracket 9. Through bol ...

Removal and Installation

1. Disconnect the battery negative terminal first, then the positive terminal. Tightening torque :(+) terminal : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2l ...

See also:

Checking the engine oil level
2.4 engine 2.0 engine 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few min ...

Central door locks
The central door locking switch is located on the driver’s arm rest. It is operated by depressing the door lock switch. If any door is open when the switch is depressed, the door will remain loc ...

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line.The SAS is used to determine turning di ...