Kia Optima: Auto Head Lamp Leveling Unit. Repair procedures

Operation

Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Sensor angle change. 3. Microprocessor calculates necessary ...

Inspection

1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check for operation. If the aim of the head lamps changes smoothly when the head lamp leve ...

See also:

Components and Components Location
Components Location 1. Drive shaft 2. Lower arm 3. Front disk 4. Front strut assembly 5. Steering gearbox 6. Front stabilizer bar 7. Sub frame ...

Replacement (Without EPB)
Rear brake pads 1. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. Tightening torque:21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft) ...

If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. ...