Kia Optima: Automatic Transaxle Control System
- Description and Operation
- Repair procedures
- Schematic Diagrams
- Components and Components Location
- Transaxle Control Module (TCM). Description and Operation
- Transaxle Control Module (TCM). Schematic Diagrams
- Transaxle Control Module (TCM). Repair procedures
- Transaxle Oil Temperature Sensor. Description and Operation
- Transaxle Oil Temperature Sensor. Specifications
- Transaxle Oil Temperature Sensor. Schematic Diagrams
- Transaxle Oil Temperature Sensor. Repair procedures
- Input Speed Sensor. Description and Operation
- Input Speed Sensor. Specifications
- Input Speed Sensor. Schematic Diagrams
- Input Speed Sensor. Troubleshooting
- Input Speed Sensor. Repair procedures
- Output Speed Sensor. Description and Operation
- Output Speed Sensor. Specifications
- Output Speed Sensor. Schematic Diagrams
- Output Speed Sensor. Troubleshooting
- Output Speed Sensor. Repair procedures
- Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
- Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
- Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
- Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures
- 26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
- 26 Brake Control Solenoid Valve(26/B_VFS). Specifications
- 26 Brake Control Solenoid Valve(26/B_VFS). Schematic Diagrams
- 26 Brake Control Solenoid Valve(26/B_VFS). Repair procedures
- Line Pressure Control Solenoid Vale. Description and Operation
- Line Pressure Control Solenoid Vale. Specifications
- Line Pressure Control Solenoid Vale. Schematic Diagrams
- Line Pressure Control Solenoid Vale. Repair procedures
Flow Diagram
Power Flow Chart
P,N
UD/B
LR/B
26/B
35R/C
OD/C
OWC
●
...
See also:
Checking Brake/Clutch Fluid Level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX and MIN indicators on the side of the reservoir.
Before removing the reservoir cap and adding brake flui ...
Receiver-Drier. Repair procedures
Replacement
1.
Remove the condenser, and then
remove the bottom cap (B) with L wrench (A) from the condenser.
Tightening torque :20~25N.m
(2.0~2.5kgf.m, 14.5~18.2lb-ft) ...
Inspection
Measuring Resistance
1.
Disconnect the cruise control switch connector from
the control switch.
2.
Measure resistance between terminals on the con ...
Copyright © www.kiopman.com 2024