Kia Optima: Battery. Repair procedures

Battery. Components and Components Location

Components 1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket ...

Removal and Installation

1. Disconnect the terminals from the battery. Tightening torque :(+) terminal (A) : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft) (-) terminal (B) : 4.0 ...

See also:

Checking Cables And Wires
1. Check the terminal for tightness. 2. Check terminals and wires for corrosion from battery electrolyte, etc. 3. Check terminals and wire ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the OTS connector. 3. Remove the OTS. 4. After immersing the thermistor of the ...

Mode Control Actuator. Description and Operation
Description The mode control actuator is located at the heater unit.It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select s ...