Inspection
1.
Check the bushing for wear and
deterioration.
2.
Check the rear lower arm for
deformation.
3.
Check the coil spring and spring
pad for deterior ...
Heater Unit. Repair procedures
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Recover the refrigerant with
a recovery/ recycling/ charging station.
3.
When the e ...
Auto light control
To operate the auto light, turn the knob on the end of the control lever.
If you set the knob to “AUTO” the tail lights and headlights will be turned on
or off automatically according to the outs ...