Closing the hood
1. Before closing the hood, check the following:
All filler caps in engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
eng ...
Components and Components Location
1. Piston ring
2. Snap ring
3. Piston
4. Connecting rod
5. Connecting rod upper bearing
6. Piston pin
7. Connecting rod lower bearing
8. Connecting ...
Installation
1.
Install the overhead console
lamp after connecting the sunroof switch connector and lamp connector.
2.
Install the lens after tightening
2 screws.
...