Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition
On
As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM
activates the warning lamp for a ...
The Other Fuses And Relays Component. Repair procedures
Inspection
Power Relay Test (Type B)Check for continuity between the terminals.
A : Two turn unlock relay
1.
There should be continuity between
the No.30 and No.87 terminals when power ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the RCV control solenoid valve connector.
3.
Measure resistance between the valve terminals 1
...