With the shift lever in the P position, the system will move the driver's seat automatically as follows.
Removal
Rear Combination lamp (Outside)
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the rear combination lamp
cover (A).
3.
Replace the ...
Starter
Relay. Repair procedures
Inspection
1.
Remove the fuse box cover.
2.
Remove the starter relay (A).
3.
Using an ohmmeter, check that there is continuit ...
If engine turns over normally but
does not start
1. Check fuel level.
2. With the ignition switch in the LOCK
position, check all connectors at the
ignition coil and spark plugs.
Reconnect any that may be disconnected
or loose.
3. Check th ...