Kia Optima: Exhaust Manifold. Components and Components Location
Components
|
1. Hear protector 2. EWGA(Electric Waste Gate Actuator) 3. C-ring 4. Turbo manifold module 5. Turbocharger stay 6. Trubo adapter gasket 7. Turbo adapter |
8. Turbo adapter heat protector 9. Oil drain pipe assembly 10. Turbocharge oil drain gasket 11. Oil feed pipe & hose assembly 12. Oil drain gasket 13. Exhaust manifold gasket 14. Turbocharger water feed hose 15. Turbocharger water drain hose |
Intake Manifold. Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative
terminal (A).
Tightening torque4.0 ~
6.0N.m (0.4 ~ 0.6kgf.m, 3. ...
Exhaust Manifold. Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative
terminal.
Tightening torque4.0 ~
6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ ...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the connector (A), and then remove the
sensor (B).
...
Component Location (2)
1. FOB holder
2. Door outside handle
3. Trunk lid open switch
4. FOB key
...
Safety Belt Warning Chime
If the driver's lap/shoulder belt is not fastened when the key is turned ON or
if it is unfastened after the key is turned ON, safety belt warning chime sounds
for approximately 6 seconds. ...
Copyright © www.kiopman.com 2024