Removal
Room Lamp
1.
Disconnect the negative(-) battery
terminal.
2.
Carefully remove the lamp lens
(A) from the room lamp with a flat-tip screwdriver.
...
To defrost outside windshield
1. Set the mode selection switch to the
position.
When you select position, the system
automatically turns on the outside (fresh) air mode.
2. Set the temperature control knob to the extreme ...
Inspection (With GDS)
1.
Check BCM input/output specification
of multifunction switch using the GDS. If the specification is abnormal,
replace the lamp or wiper switch.
2.
If diagnosis is ...