Kia Optima: High Mounted stop lamp. Repair procedures

Installation

1. Install the front fog bulb. 2. Reconnect the lamp connector. 3. Install the front bumper. ...

Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the rear seat.(Refer to the BD group - "Rear seat") 3. Remove the package tray ...

See also:

Heater & A/C Control Unit(Manual). Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Using the screwdriver, remove the side cover (A). 3. Loosen the mounting scre ...

Control System Composition
Fault DiagnosisFeatures a fail-safe mechanism that prevents dangerous situations from developing in the event of a transaxle failure. The limp home mode engages if the transaxle malfunctions. ...

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws then connect the pressure side impact sensor connector. Tightening t ...