If a tire goes flat while you are driving:
1.Take your foot off the accelerator pedal and let the vehicle slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause a loss of control. When the vehicle has slowed down to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on a firm level ground. If you are on a divided highway, do not park in the median area between the two traffic lanes.
2.When the vehicle is stopped, turn on your emergency hazard flashers, set the parking brake and put the transaxle in P (automatic transaxle) or reverse (manual transaxle).
3.Have all passengers get out of the vehicle. Be sure they all get out on the side of the vehicle that is away from traffic.
4.When changing a flat tire, follow the instruction provided later in this section.
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
3.
Remove the ...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST : For a single wiping cycle, push the lever upward and release it with the
lever in the OFF position. The wipers will operate conti ...
Inspection
1.
Disconnect the ignition switch
connector (A) and key warning switch connector (B) from the steering column.
2.
Check for continuity between
the ter ...