Kia Optima: Inspection
| 1. | Check the strut bearing for wear and damage. |
| 2. | Check the spring upper and lower seat for damage and deterioration. |
| 3. | Compress and extend the piston
rod (A) and check that there is no abnormal resistance or unusual sound
during operation.
|
Disassembly
1.
Using the special tool (09546-26000),
compress the coil spring (A).
Tightening torque:58.8
~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6lb-ft)
...
See also:
Front fog light
Fog lights are used to provide improved visibility and avoid accidents when visibility
is poor due to fog, rain or snow etc. The fog lights will turn on when fog light
switch (1) is turned to ON ...
Photo Sensor. Description and Operation
Description
1.
The photo sensor is located at
the right of defrost nozzle.
2.
The photo sensor contains a photovoltaic
(sensitive to sunlight) diode. The solar radi ...
Headlight High Beam Indicator
This indicator illuminates
when the headlights are on and in the high beam position or when the turn signal
lever is pulled into the Flash-to-Pass position. ...
Copyright © www.kiopman.com 2024