Kia Optima: Inspection
| 1. | Check the rubber parts for wear and deterioration. |
| 2. | Compress and extend the piston
rod (A) and check that there is no abnormal resistance or unusual sound
during operation.
|
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
See also:
Defrost Button
Most of the air flow
is directed to the windshield with a small amount of air directed to the side window
defrosters.
When the defrost button is pressed the outside (fresh) air position will aut ...
Inspection
Driver Door Lock Switch Inspection
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door" ...
Removal and Installation
1.
Disconnect the battery negative terminal first, then
the positive terminal.
Tightening torque
:(+) terminal : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m,
5.8 ~ 7.2l ...
Copyright © www.kiopman.com 2024