Kia Optima: Inspection
| 1. | Check the bushing for wear and deterioration. |
| 2. | Check the rear lower arm for deformation. |
| 3. | Check the coil spring and spring pad for deterioration and deformation. |
| 4. | Check for all bolts and nut. |
Installation
1.
Installation is the reverse of
removal.
•
If you don't
...
See also:
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the rear seat.(Refer
to the BD group - "Rear seat")
3.
Remove the package tray ...
Components and Components Location
Component Location
1. Horn switch
2. Horn relay (Engine room compartment)
3. Clock spring
4. Horn (Low)
5. Horn (High)
...
ETC (Electronic Throttle Control) System. Specifications
Specification
[Throttle Position Sensor (TPS)]
Throttle Angle(°)
Output Voltage(V)
TPS1
TPS2
0
0.0
5.0
...
Copyright © www.kiopman.com 2024