Kia Optima: Inspection

Hands Free Switch. Repair procedures

...

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group) 3. Remove the steering wheel. (Refe ...

See also:

If the engine overheats
If your temperature gauge indicates overheating, you will experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull of ...

Reassembly
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots. 2. Apply grease to the joint boot on the side of the wheel and install the boot. ...

Suspension System. Tires/Wheels. Wheel. Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque:88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...