1. | Install the mirror assembly. |
2. | Install the mirror wiring cover
and connector.
|
Cowl Top Cover. Repair procedures
Replacement
1.
Remove the cap (B) and remove
the nuts, then remove the wiper arm (A).
Tightening torque :22.6~26.5
N.m(2.3~2.7 kgf.m, 16.6~19.5 lb-ft)
...
Installation
-
Make sure that the IMS
control switch connectors and related connectors are plugged in
properly.
...
Front Impact Sensor (FIS). Description and Operation
Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are
remote sensors that detect acceleration due to a collision at its mounting location.
The primary pur ...