Kia Optima: Power Seat Motor. Repair procedures
Inspection
Power Seat Motor| 1. | Disconnect the connectors for
each motor. A : Front height motor B : Slide motorC : Rear height motor D : Recline motorE : Lumber support motor
|
| 2. | With the battery connected directly to the motor terminals, check if the motors run smoothly. |
| 3. | Reverse the connections and check that the motor rotates in reverse. |
| 4. | If there is an abnormality, replace
the motors.
|
| 1. | Disconnect the limit switch and operate the limit switch. |
| 2. | Check for continuity between the terminals. |
| 3. | Make sure that the seat operation is normal in the reverse after the maximum operation. |
| 4. | If there is an abnormality, replace
the limit switch.
|
Components and Components Location
Component Location
1. Slide motor
2. Front height motor
3. Rear height motor
4. Lumber support motor
5. Power seat control switch
6. Recline motor
7. Reclin ...
Power Seat Control Switch. Schematic Diagrams
Circuit Diagram
...
See also:
Installation of a Mobile Two-Way Radio System
If a mobile two-way radio system is installed improperly, or if an excessively
powerful type of system is used, other electronic systems may be adversely affected.
To avoid damage to your vehicle, ...
Rail Pressure Sensor (RPS). Schematic Diagrams
Circuit Diagram
...
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque
:4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) ...
Copyright © www.kiopman.com 2024