Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Loosen the mounting bolts and
then remove the under cover (A).
3.
Disconnect the connector ...
Replacement
The injector combustion seal should be replaced new one to
prevent leakage after removing the injector.
1.
Remove the combustion seal (A) with a wire cutter.
...
Engine compartment fuse
replacement
1. Turn the ignition switch and all other
switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the cover
up.
3. Check the removed fuse; replace it if it
is blow ...