Kia Optima: Rear Assist Arm. Repair procedures

Inspection

1. Check the rear stabilizer bar for deformation. 2. Check the rear stabilizer link ball joint for damage. ...

Replacement

1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9 N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Function
Function RequirementsThe BCM controls IPS and relay on the SJB. For example, if BCM requests head lamp low beam control, then BCM requests related lamp control at one time. Signal Flow DiagramThi ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the RCV control solenoid valve (A) after disconnect the connector, ...

Description and Operation
Description The charging system includes a battery, an alternator with a built-in regulator, and the charging indicator light and wire.The Alternator has built-in diodes, each rectifying AC curren ...