Kia Optima: Removal

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Remove the front passenger seat assembly. (Refer to the Body group - Seat)

3.	Remove the OCS assembly. (Refer to the Body group - Seat)

Weight Classification System (WCS). Repair procedures

...

Installation

OCS(Occupant Classification System) is utilizing a robust weight measuring technology. Thus, if any of the following conditions occur ...

See also:

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between sensor signal terminal and sensor g ...

Mode Control Actuator. Description and Operation
Description The mode control actuator is located at the heater unit.It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select s ...

Inspection
Driver Airbag (DAB) If any improper parts are found during the following inspection, replace the airbag module with a new one. ...

Categories

Kia Optima Manuals

Copyright © www.kiopman.com 2025