1. | Disconnect the vapor hose (A). |
2. |
Remove the PCV valve (B).
|
Interior Trim. Components and Components Location
Components
1. Front pillar trim
2. Center pillar upper trim
3. Center pillar lower trim
4. Rear pillar trim
5. Cowl side trim
6. Front door scuff trim
7. Rea ...
Erasing Programmed Buttons
To erase the three HomeLink buttons, press and hold the two outside buttons until
the indicator light begins to flash (after 20 seconds). Release both buttons.
Individual buttons cannot be erased ...
System Operation
Ventilation
1. Set the mode selection switch to the
position.
2. Set the air intake control switch to the outside air position.
3. Set the temperature control knob to the desired position.
4. Se ...