Circuit Diagram
Troubleshooting
Failure Diagnosis
1.
In principle, ESC and TCS controls
are prohibited in case of ABS failure.
2.
When ESC or TCS fails, only the
failed system control is prohibited ...
Inspection
1.
Check the signal waveform of the CMPS and CKPS using
the GDS.
Specification:
Refer to “Wave Form”
...
Adjustment
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in),
conform to below.
1.
Disconnect the stop lamp switch
...