Kia Optima: Specifications - Rear Parking Assist System - Body Electrical System - Kia Optima TF 2011-2024 Service ManualKia Optima: Specifications

Specification

Item
Specification
Ultrasonic sensor
Voltage rating
DC 8.5 V
Detecting range
40 cm ~ 120 cm
Operation voltage
DC 8 ~ 10 V
Operation current
MAX 100 mA
Operation temperature
-30°C ~ +80°C (-22°C ~ +176°C)
Operation frequency
48 ± 3 KHz
Number of sensors
4 (Left side, Left center, Right center, Right side)
Piezo buzzer
Voltage rating
DC 12 V
Operation voltage
DC 7.5 ~ 14.5 V
Operation temperature
-30°C ~ +80°C (-22°C ~ +176°C)
Rated current
Below MAX 50 mA
Sound, tone
Oscillation frequency : 2,000 ± 40 Hz
Sound level : Min : 83 dB (DC 13V /m, 1m)

※ Rear parking assist control unit function and buzzer are built in BCM (body control unit).


Rear Parking Assist System
...

Components and Components Location
Component Location 1. BCM 2. Ultrasonic sensor 3. Buzzer ※ Rear parking assist control unit function and buzzer are built in BCM (bod ...

See also:

Repair procedures
On-vehicle Inspection • Check that the battery cables are connected to the correct terminals. ...

If the engine overheats
If your temperature gauge indicates overheating, you will experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull of ...

Air Bag Warning
This warning light will remain on for approximately 6 seconds each time you turn the ignition switch ON. If the system does not operate as described or if the light comes on while the vehicle is ...

Copyright © www.kiopman.com 2024