Installation
1.
The key of crankshaft should
be aligned with the mating face of main bearing cap. As a result of this,
the piston of No.1 cylinder is placed at the top dead center on compression ...
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Front Seat Adjustment - Power
The driver's seat can be adjusted by using the control knob on the left side
of the seat. Before driving, adjust the seat to the proper position so as to easily
control the steering wheel, ped ...