Removal
1.
Disconnect the battery negative
cable and wait for at least 3 minutes before beginning work.
2.
Remove the roof trim. (Refer
to the Body group- Interior)
...
Adjustment
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in),
conform to below.
1.
Disconnect the stop lamp switch
...
Mode Selection
Controls the direction of air flow through the ventilation system.
The air from outlet port flows at any mode. Close the ventilation outlets using
the knob to block the air flow if you do not wan ...