Kia Optima: 35R Clutch Control Solenoid Valve(35R/C_VFS). Specifications
Specifications
Direct control VFS[35R/C]▷ Control type : Normal low type
|
Control Pressure kpa(kgf/cm², psi) |
500.14~9.81(5.1~0.1,72.54~1.42) |
|
Current value(mA) |
50~850 |
| Internal
resistance(Ω) |
5.1 |
35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation
Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside the
35R clutch.
...
35R Clutch Control Solenoid Valve(35R/C_VFS). Schematic Diagrams
Circuit Diagram
...
See also:
Service Adjustment Procedure
Oil level Check
A check of ATF level is not normally required during scheduled services.
If an oil leak is found, perfo ...
Immobilizer Control Unit. Repair procedures
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
...
Inspection
1.
Check the plated parts of the
disc & hub assembly (A) for color changes, peeling or other damage. If there
is damage, replace the clutch set.
2.
Check the pull ...
Copyright © www.kiopman.com 2024