Kia Optima: Brake System

Installation

1. Remove ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least three minutes. 3. Install the ancho ...

General Information

...

See also:

Changing the Automatic Transaxle Fluid
1. Raise and suitably support the vehicle. 2. Remove the drain plug located at the bottom center front of the transaxle pan. 3. After the oil has drained, completely install a new washer on the plug ...

Line Pressure Control Solenoid Vale. Specifications
Specifications Direct control VFS[LINE Pressure]▷ Control type : Normal low type Control Pressure kpa(kgf/cm², psi) 500.14~9.81(5.1~0.1,72.54~1.42) ...

Replacement
Door Trim Replacement • Be careful not to scratch the door trim and other parts. • Put ...