Kia Optima: ESC(Electronic Stability Control) System

EPB Switch. Repair procedures

Remove 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the floor console upper cover.(Refer to Body group - "Console") ...

Components and Components Location

Components 1. HECU module 2. Front wheel speed sensor 3. Rear wheel speed sensor 4. Yaw rate & Lateral G sensor 5. Steering angle sensor 6. ABS Warning lamp ...

See also:

Speed sensing door lock system (if equipped)
All doors will be automatically locked after the vehicle speed exceeds 15 km/h (9.3 mi/h). And all doors will be automatically unlocked when you turn the engine off or when you remove the ignition ...

Adjusting the Front Seatback Recliner
To change the seatback angle, lean forward slightly and raise the lever located on the outer portion of the seat. Slowly and carefully lean back to the desired angle and release the lever. After ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. 3. Install the seat belt ...