Kia Optima: Installation
| 1. | Install the heater control unit. |
| 2. | Install the center fascia lower panel. |
| 3. | Install the crash pad garnish. |
Removal
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the lower (A) after loosening
the mounting screws.(Refer to the BD group - "Crash pad")
...
See also:
Replacement
1.
Remove the front wheel & tire.
Tightening torque:88.3
~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1~79.6lb-ft)
...
Components [Panoramaroof]
1. Roof trim
2. Sunvisor
3. Retainer
4. Assist handle bracket
...
Adjustment
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in),
conform to below.
1.
Disconnect the stop lamp switch
...
Copyright © www.kiopman.com 2024