1. | Remove the steering column upper
and lower shrouds after removing 3 screws.
|
2. | Remove the wiper switch (A) by releasing the part. |
3. | If necessary of removing the
wiper & washer switch (A), release the lock of wiper switch using tool without
removing the steering wheel and the clock spring.
|
Installation
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
3.
In ...
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
Replacement (With EPB)
Rear brake pads
1.
Remove the rear wheel & tire.
2.
Connect the GDS to the data link
connector located underneath the dash panel.
3.
Ignition "ON& ...